air bath

Some investigations are made out on the mixture in the middle course through the modified wheel tracking test in air bath and the Hamburg wheel tracking test ( HWTT) in water bath, and the results of which are compared with the corresponding research in Germany.

通过中面层空气浴改进车辙试验及汉堡浸水车辙试验，对中面层沥青混合料的抗车辙性能进行了研究，并与德国的相关研究成果进行了比较与分析。

The induction time of HFC 152a refrigerant gas hydrate is studied experimentally. the relationship between induction time and air bath temperature is obtained.

对HFC152a致冷剂气体水合物结晶生成过程进行了实验研究，研究了外界环境温度对水合物结晶引导时间的影响，通过数据分析，得到了引导时间与环境温度的依变关系。

This is not only in the good" air bath", also accepted the hardy training, the body gradually adapt to the cold stimulation, for the upcoming winter ready.

这不但是在进行好的“空气浴”，还接受了耐寒训练，使身体逐渐适应寒冷的刺激，为即将到来的寒冬做好充分的准备。

The First Smelter Introducing Oxygen enriched Air Bath Smelting Technology in China& A brief account of technical modification in Daye Smelter; Determination Method Improvement of Selenium Content in Copper Electrolysis Slime from Smelter of Daye Nonferrous Metals Corporation

我国第一座引进富氧熔池熔炼技术的工厂&大冶冶炼厂冶炼技术改造概况大冶有色金属有限公司冶炼厂铜阳极泥中硒测定方法改进

It describes major features of Noranda oxygen enriched air bath smelting process and its adaptability to modification of Daye Smelter, analyses in details the modification design and the difference from Horne Smelter and presents satisfactory results achieved after modification.

阐述了诺兰达富氧熔池熔炼工艺的主要特点和对大冶冶炼厂改造的适应性，详细分析了大冶改造设计与霍恩冶炼厂的不同之处，并介绍改进后所取得的效果。

The oven operates on the air-bath principle.

恒温槽工作基于空气浴原理.

This paper analysed briefly technical characteristic of different kinds of copper crude metallurgy and combined with productive practice of Yunnan Copper Industry Company. Application of oxygen enriched air top blowing bath smelting process to reconstruct copper crude metallurgy system have been put forward.

文章简要分析各种铜粗炼工艺特点，结合云南铜业股份有限公司生产实际，提出了采用富氧顶吹熔池熔炼法改造铜粗炼系统是较为合理的工艺方案。

A heat treatment to composite membrane, preferred in a 70 ℃ hot air bath for 20 minutes can improve the salt resistance of the composite membrane. ⅱ.

对复合膜进行适当的热处理可以进一步改善复合膜的脱盐性能，以70℃热空气浴，20min为宜。